 |
| 3P 40A Switch , Red Toggle |
| |
Technical Properties
Architecture
| Type of order: | Break switch |
| Neutral position: | without neutral |
| Number of poles: | 3 P |
| Type of pole: | 3 P |
Main electrical features
| Frequency: | 50/60 Hz |
| Rated operational voltage Ue: | 400 V |
Voltage
| Rated insulation voltage: | 440 V |
| Type of voltage input 1: | AC |
| Rated impulse withstand voltage: | 6000 V |
Electric current
| Rated operational current in AC21 category A: | 40 A |
| Rated operational current in AC21category B: | 40 A |
| Acceptable current rating with AC22 category A: | 40 A |
| Acceptable current rating with AC22 category B: | 40 A |
| Short-circuit current with gI-gG fuses: | 600 A |
| Closing ability with 400V in AC23A: | 846 A |
| Rated short-circuit making capacity Icm under 415V AC according IEC 60947-3: | 846 A |
| Rated short-time withstand current 1s: | 0,6 kA |
| Thermal rated current outside of housings: | 40 A |
Power
| Power loss per pole at In: | 1,1 W |
| Total power loss under IN: | 3,3 W |
Endurance
| Electrical durability at nominal load in AC21in operating cycles: | 5000 |
| Electrical durability at nominal load in AC22 in operating cycles: | 5000 |
| Number of mechanical operations: | 60000 |
Dimensions
| Depth of installed product: | 68 mm |
| Height of installed product: | 83 mm |
| Width of installed product: | 52,5 mm |
Installation, mounting
| Tightening torque: | 2,8Nm |
Connection
| Cage clamp position: | in line |
| Connection cross-sect. rigid cable: | 2,5 / 25mm² |
| Connection cross-sect. flexible conductor: | 2,5 / 16mm² |
| Type of connection: | with screw |
Equipment
| Quantity of NO contacts: | 3 |
Standards
| Standard text: | IEC 60947-3, IEC/EN 60669-2, IEC/EN 60669-4 |
| European directive WEEE: | not concerned |
Safety
| Protection index IP: | IP20 |
Use conditions
| Degree of pollution according to IEC 60664 / IEC 60947-2: | 2 |
| Altitude: | 2000 m |
| Storage temperature: | -40 to 80 °C |
Identification
| Device family: | SBR |