Cat. Ref.:HHA098Z
EAN No.:3250613136024
ex. GST*:376,13 $ / pc.
inc. GST*:413,74 $ / pc.

Technical Properties

Architecture
Type of order:Toggle
Number of poles:1 P
Type of pole:1P1D
Functions
Complete device with protection unit:yes
Trip Unit:TM F/F
Integrated earth fault protection:no
Compatibility
Compatible with DIN rail mounting:no
Main electrical features
Rated operational voltage Ue:220 / 240 V
Frequency:50/60 Hz
Voltage
Rated insulation voltage:690 V
Rated impulse withstand voltage:8 kV
With under voltage release:no
Electric current
Rated current:100 A
Rated ultimate short-circuit breaking capacity Icu under 690V AC IEC 60947-2:4 kA
Thermal protection nob setting xIN:1
Breaking capacity on 1 pole for IT 230V NF 60947-2:21 kA
Breaking capacity on 1 pole for IT 400V NF 60947-2:9 kA
Rated service breaking capacity Ics AC according IEC 60947-2:80 %
Rated ultimate short-circuit breaking capacity Icu under 230V AC IEC 60947-2:25 kA
Rated ultimate short-circuit breaking capacity Icu under 240V AC IEC 60947-2:35 kA
Rated ultimate short-circuit breaking capacity Icu under 400V AC IEC 60947-2:25 kA
Rated ultimate short-circuit breaking capacity Icu under 415V AC IEC 60947-2:25 kA
Rated ultimate short-circuit breaking capacity Icu under 440V AC IEC 60947-2:20 kA
Current correction factors
Correction factor of rating current for 2 devices placed side-by-side:1
Correction factor of rating current for 3 devices placed side-by-side:1
Correction factor of rating current for 4 and 5 devices placed side-by-side:1
Correction factor of rating current for 6 devices placed side-by-side:1
Power
Total power loss under IN:8,4 W
Power loss per pole at In:8,4 W
Tripping
Tripmode:TM
Time of response when opening:10 ms
Endurance
Electric endurance in number of cycles:1000
Number of mechanical operations:4000
Installation, mounting
Tightening torque:6Nm
DIN rail mounting with optional adaptator:yes
Connection
Connection cross-sect. flexible conductor:4 / 70mm²
Connection cross-sect. rigid cable:4 / 95mm²
Connection:Front connection
Type of connection:with screw
Settings
Range of the magnetic adjustment:1500 A
Setting type In or Ith:IN
Equipment
Motor drive optional:no
Use cases
Category of use:A
Standards
Standard text:IEC 60947-2
European directive WEEE:concerned
Safety
Protection index IP:IP4X
Use conditions
Altitude:2000 m
Air humidity protection:for all climates

*All data is subject to errors and technical modifications. All prices are recommended retail prices.