This product is not sold any longer.
This page, however, remains available for information ourposes.
Please contact your wholesaler in order to find appropriate follow-up products!
Light sensitive switch with cell |
|
Technical Properties
Architecture
Bus system: | EIB | |
Fixing mode: | Din-Rail |
Functions
|
Controls and indicators
|
Voltage
Operating voltage over bus: | 21…32 V DC | |
System supply voltage: | 30V DC via bus |
Electric current
Number of entry circuits: | 6 |
Length
Maximum connection distance between receiver and transmitter: | 100m |
Power
Total power loss under IN: | 0,3 W |
Detection
|
Materials
Colour: | stone grey |
Dimensions
Depth of installed product: | 65 mm | |
Height of installed product: | 85 mm | |
Length: | 36 mm | |
Width of installed product: | 64 mm | |
Width of rail mounted device (RMD): | 2 modules | |
Max. distance for probe connection: | 100 m |
Lighting control
Brightness measurement range: | 2 / 20000 Lux | |
Brightness measuring range, linear: | 2…20000 lx |
LED control
LED: | with 2 status LEDs |
Connection
Connection cross-sect. flexible conductor: | 1 / 6mm² | |
Connection cross-sect. rigid cable: | 1,5 / 10mm² | |
Type of connection: | with screw | |
| ||
| ||
|
Settings
Supported configuration modes: | system, easy | |
|
Equipment
Number of channels: | 1 | |
|
Safety
Protection index IP: | IP20 |
Use conditions
Operating temperature: | 0…45 °C | |
Storage/transport temperature: | -20…70 °C |
Identification
Main design line: | KNX |
Instructions
Information text: | Use a double-shielded cable to connect the surface-mounted brightness sensor or to extend the connection cable of the built-in brightness sensor. |