Cat. Ref.:CDA425T
EAN No.:3250611615491
ex. GST*:126,63 $ / pc.
inc. GST*:139,29 $ / pc.

Technical Properties

Neutral position:right
Number of poles:4 P
Fixing mode:DIN rail type O
Compatible with DIN rail mounting:yes
Main electrical features
Rated operational voltage Ue:230 / 400 V
Frequency:50 Hz
Rated insulation voltage:500 V
Rated impulse withstand voltage:4000 V
Electric current
Rated residual operating current:30 mA
Rated current:25 A
Withstand not tripping on 8-20 μs wave:0,25 kA
Breaking and opening capacity:1,5 kA
Rated conditional short-circuit current Inc according to EN 61008-1:6 kA
Electric current / temperature
Rating current -25°C:25 A
Rating current -20°C:25 A
Rating current -15°C:25 A
Rating current -10°C:25 A
Rating current -5°C:25 A
Rating current 0°C:25 A
Rating current 5°C:25 A
Rating current 10°C:25 A
Rating current 15°C:25 A
Rating current 20°C:25 A
Rating current 25°C:25 A
Rating current 30°C:25 A
Rating current 35°C:25 A
Rating current 40°C:25 A
Rating current 45°C:25 A
Rating current 50°C:25 A
Rating current 55°C:25 A
Rating current 60°C:25 A
Rating current 65°C:22 A
Rating current 70°C:18 A
Frequency:50 Hz
Total power loss under IN:4,5 W
Power loss per pole at In:2 W
Protected against nuisance tripping:no
Short-time delayed tripping:no
Electric endurance in number of cycles:2000
Number of mechanical operations:4000
Depth of installed product:70 mm
Height of installed product:83 mm
Width of installed product:70 mm
Construction size (DIN 43880):1
Installation, mounting
Type of top connection for modular devices:with screw
Tightening torque:2,8Nm
Type of top rail clip for modular devices:NA
Type of bottom rail clip for modular devices:plastic
Type of Bottom Connection for modular devices:BIconnect
Top removability for modular devices:no
Bottom removability for modular devices:yes
360° product mounting position:yes
Connection cross-section at output with screw, for massive conductor:1 / 25 mm²
Connection cross-sect. flexible conductor:16mm²
Connection cross-sect. rigid cable:25mm²
Connection cross-section for rigid conductor, upstream terminals with screws:1 / 25 mm²
Connection cross-section of the access with screws, with flexible conductor:1 / 16 mm²
Connection cross section of access and exit with screws, for flexible conductor:1 / 16 mm²
Type of connection:with screw
With interlocking device:yes
Standard text:IEC 61008-1, AS/NZS
European directive WEEE:not concerned
Protection index IP:IP20
Residual current type:A
Use conditions
Operating temperature:-25…40 °C
Degree of pollution according to IEC 60664 / IEC 60947-2:2
Altitude:2000 m
Storage/transport temperature:-55…70 °C

*All data is subject to errors and technical modifications. All prices are recommended retail prices.